Tweet
Hold tension before reclamping for 20 seconds. STring next cross in between pulls on crosses. Keep the time indentical in between pulls.
Also, here is the jet method of stringing: String first four center mains on each side at reference tension.
Next 2 (on 16 mains) or 3 (on 18 mains) reduce tension by 4 pounds.
On a 16 main pattern after pulling main #6 skip over to #8. Increase tension 4 pounds (to reference tension) before tensioning. (#8 will be pulled at reference tension). On an 18 main pattern after pulling #7 skip over to #9. Increase tension 4 pounds before tensioning.
Fill-in main #7 (on a 16 main or #8 on an 18 main) which will be the last main. Adjust tension by adding an additional 4 pounds (reference plus 4.)
Tie off on main #6 (16 main) or #7 (18 main).
CROSS STRINGS :
IMPORTANT: Each cross string must be held under tension at least 20 seconds before clamping off. We recommend weaving the next cross while the previous one remains under tension.
Start first three cross strings and tension at same tension as final mains. (+4 over reference tension)
After installing 3rd cross string, reduce tension 6 pounds and install the rest of the cross strings (This will be reference – 2)
After stringing 3rd last cross, loop over and weave final cross. Increase tension +6 pounds.
For last cross string fill in second from bottom. Tie off on 3rd from bottom.